Splice Desk user guide
Open Splice Desk from the local application bundle on an Apple-silicon Mac running macOS 26 or later. If you already have Splice Desk open, save a project copy, quit and relaunch the updated app.
Make your first edit
- Choose Import media. Start with an SDR MP4 or MOV interview, then add any cutaway movie, PNG still or WAV music file.
- Select the interview in the Media bin. Use the Source monitor to find the start and end you want, and click Mark in and Mark out. Then choose Place in sequence → Insert story clip.
- Click the ruler to set the timeline playhead. Select a clip and use the Inspector to adjust its source in, length, placement, gain or fade where available. Click Apply changes. Timing fields use frames at 30 fps. For example, 90 frames is three seconds.
- To add B-roll, select the Story clip it should follow, place the playhead, then choose the cutaway source and Place in sequence → Attach cutaway. Use Add to music lane for independently placed audio.
- Use Loop cut to hear and see the join around the current playhead. Use Match source frame in the Inspector to inspect the original. Save with ⌘S.
Timeline controls
| Task | Control |
|---|---|
| Insert or replace a Story range | Select a Story clip before using Insert story clip or Overwrite story at selection. |
| Change Story order | Select a clip and use Move earlier or Later in the Inspector. |
| Divide a clip | Place the playhead inside the selected clip and click Split at playhead. |
| Remove a clip | Select it and click Remove clip. |
| Protect a lane or isolate its audio | Open the lane menu for Lock lane, Mute lane or Solo lane, where available. |
| Replay the entire sequence | Use the render button below the Program monitor. |
Splice Desk prepares a preview around the playhead after edits and jumps. Longer edits use six-second preview windows and can pause at a boundary if the next window is still rendering. Check the monitor header for Preparing next section, Next section ready, or Waiting for next section. For supported movie sources, Create preview proxy can help when working with large files or an original that will be offline.
Review duplicate media
Choose Bin tools → Review duplicate footage and scan. Exact copy means the registered assets have the same file hash. Possible copy means similar duration and matching sampled frames. Open either source to compare before deciding what to keep. A normal import skips exact copies of already linked originals. Use Relink original if you want to replace a source path.
Find footage by picture
Choose Bin tools → Visual footage search, then click Scan linked media. Search for an English object or scene label such as “bicycle.” Click Open moment to inspect the match at its source frame. Choose Find similar shots on a result or browse samples with an empty search to choose a reference frame. Matches are ranked by visual similarity and show the best sampled frame per source. The scan samples up to three moments per movie, so objects between samples may be missed. Analysis runs on the Mac.
Find B-roll from a quote
Click Suggest B-roll beneath a transcript quote, then scan the linked media. Check the matched visual label and source timecode. Open moment opens the original in the Source monitor. Place muted cutaway overlays the suggested sample on the selected quote for as long as its source and the quote allow. Story audio continues beneath it. Suggestions use words shared between the quote and sampled visual labels.
Find text on screen
Open Bin tools → Visual footage search, switch to Text in footage, and scan the linked media. Enter wording from a slide, sign, or screen recording and select Open moment to inspect it in the Source monitor. The pass searches sampled frames only and processes them locally.
Make a three-point edit
- Click the timeline ruler where the edit should start.
- Open the replacement source, then set Mark in and Mark out.
- Choose Place in sequence → Insert Story at playhead to open space. Use Overwrite Story at playhead to replace the covered Story frames. Either command can begin inside a Story clip.
Use ⌥← and ⌥→ for frame steps. ⌘J shuttles backward where the player supports reverse, ⌘K pauses, and ⌘L plays forward. Repeat a shuttle command to increase speed up to 2×. The Program monitor also has visible frame-step and playback buttons.
Trim a Story clip by frames
Select a Story clip and expand Precision trim in the Inspector. Enter a positive or negative frame adjustment and check the proposed timeline start, source in, and length. Choose Apply precision trim to commit the change as one undo step.
- Ripple tail adds or removes frames at the end of the selected clip and moves later Story clips.
- Roll outgoing cut moves the boundary with the following Story clip and preserves their combined length.
- Slip source moves the source in point and keeps the clip’s timeline start and length.
- Slide clip moves the selected clip by adjusting the two neighbors. Its source and length stay fixed.
Overlays follow their anchors. A trim that would move a locked overlay or exceed the available source frames is blocked.
Export linked landscape, square, and portrait versions
Use the format menu to preview Landscape 16:9, Square 1:1, or Portrait 9:16. All three use the same Story, captions, timeline timing, and audio. Landscape and square fit the whole shot into the canvas. Portrait fills its canvas using the portrait crop settings.
In Export → Linked formats · MP4, select any format. This exports the chosen format while keeping the format currently open in the editor. Square masters are 1080 × 1080.
Compare shot luminance
Select a Story or Cutaway movie clip and expand Color scope & match. Choose Analyze luminance to see the histogram and median brightness of the original source frame at the playhead. To match another clip, choose a linked movie and reference source frame before analyzing.
Choose Use brightness match to stage the suggested adjustment. Use Preview brightness to review it, then Apply changes. The scope samples one original frame at a time. The match adjusts brightness and leaves hue and saturation unchanged.
Check title and caption placement
Choose Timeline tools → Check overlay safety. The review opens at the playhead and shows the title and caption bounds for the current canvas, with a 4% inset guide. The list identifies overlays that cross the guide or overlap one another, including motion at the selected frame.
Enter another timeline frame to inspect it, or choose Go to frame to return to the editor at that position. This is a frame-by-frame review. Check key moments when overlays move.
Save and reuse a branded title
Select a title and expand Title brand kit. Pick a typeface and enter six hexadecimal digits for each color, such as `FFFFFF` for white. Use Preview title style to review it, or choose Set title style and Apply changes to update this title.
Enter a unique preset name and choose Save title preset. The preset stores the current title text and brand settings in the project. Use Timeline tools → Insert title preset to add it at the playhead, or Use title preset to load it into the selected title. Each inserted title can be edited independently.
Animate a title or caption
Select the title or caption and expand Overlay motion. Set the ending offsets and choose Set overlay motion, or choose Suggest face motion to follow movement relative to the overlay’s starting position. Automatic suggestions require the entire overlay to sit over one linked Story movie without a cutaway, retiming, or a moving crop.
Expand Keyframes to add or update a position at a specific overlay frame. Enter the frame or choose Use playhead frame, set both offsets, and select Save keyframe. Enable Ease to next keyframe for a gradual start and stop. Use Load keyframe to retrieve saved values and Remove keyframe to delete an interior point. The first and last frames remain available as endpoints.
Choose Preview overlay motion, then Apply changes. A suggested track uses the canvas active during analysis. Review it again if you change canvas format. Clear the motion before splitting the overlay or changing its length.
Move a portrait crop through a shot
Switch the sequence to 9:16 Portrait and select a movie clip. Expand Tracked crop and choose Suggest face track to analyze sampled frames locally. Review the result, especially when multiple faces cross or leave the frame. You can also set Horizontal crop and Ending crop, then choose Set crop motion to move between those positions.
Choose Preview crop before Apply changes. If detection finds too few usable frames, use manual crop motion. Clear the track before splitting or changing the shot timing.
Compare cameras at the playhead
Place the playhead inside a Story clip and open Timeline tools → Multicam angle grid. The grid shows the Story reference and still frames from up to eight linked movies. Set an alternate’s source frame and choose Load angle frames to refresh the tile. The grid starts with a source position based on the Story reference. Adjust it to line up each angle before switching.
Set Maximum cutaway frames and choose Switch to on the alternate you want. The cutaway starts at the playhead and fits within the available source and Story frames. Story audio continues. The grid renders frames locally and uses a preview proxy when available.
Suggest a synchronized camera switch
In the multicam grid, choose Suggest switch points. Splice Desk compares one to two seconds of Story audio with each linked angle’s recorded audio near its current source frame. The playhead needs at least one second of Story material ahead. Ambiguous or missing audio produces no suggestion.
Choose Review suggested frame to load the proposed frame. The audio match score reports similarity between recordings. Compare the picture, then choose Switch to to apply the cut. The timeline changes only when you switch.
Correct timing drift between cameras
In the multicam grid, choose an alternate source frame that matches the current timeline playhead. Expand Camera drift correction on that angle and enable Correct drift. Enter the absolute timeline frame and alternate source frame of a second, later matching moment. The second moment must be within the same Story clip and alternate movie.
Review the calculated source speed and switch to the angle. The correction uses a constant rate between 95% and 105%. It changes only the alternate picture. Use Match source frame on the resulting cutaway to inspect the mapped original frame.
Cross-dissolve into a Story clip
Select the incoming Story clip and expand Picture transition. The Inspector shows how many source frames are available before the cut. In Cross-dissolve, preview or apply a duration, or choose Match previous dissolve to reuse the duration of the nearest earlier cross-dissolve. If a duration is unavailable, the incoming clip needs more unused frames or the previous clip needs to be longer. The blend ends at the picture cut and keeps the sequence duration and audio timing.
Deliver a loudness-targeted mix or audio stems
Choose Export → Loudness-targeted mix · WAV and select −16 LUFS or −23 LUFS. Splice Desk measures the mix and checks the normalized result before saving it. Very short or silent audio may not meet a target.
Choose Export → Audio stems · WAV to save the Story, Cutaway, or Music lane as a separate file. Each stem starts at the sequence start and runs for the full sequence duration. Stems retain lane audibility, clip gain, cleanup, and music ducking. Use the regular stereo mix to export without loudness normalization.
Lower music under dialogue
Transcribe the Story clips, place music on the Music lane, and choose Timeline tools → Duck music under dialogue. The Music lane drops by about 12 dB around recognized speech and returns to its previous level between phrases. The original Story audio stays at its set level. Use Turn off dialogue ducking to disable it. Ducking follows transcript timing for audible, unretimed Story clips.
Compare dialogue cleanup before applying it
Select a Story or Cutaway clip with audio and expand Dialogue cleanup. Choose Reduce rumble for low-frequency noise or Reduce rumble and hiss to also soften high-frequency noise and quiet background sound.
Use Hear original and Hear cleanup to compare the same loop. Choose Apply cleanup to keep the preset for preview and export, or Remove cleanup to return to the original sound. Cleanup runs locally and uses audio filters.
Make a J-cut or L-cut
Select the incoming Story clip and expand Sound cut. Enter a negative frame offset to bring the incoming audio in early, or a positive offset to keep the outgoing audio playing after the picture changes. Choose Preview sound cut to hear the proposed edit in a loop, then Apply sound cut to save it. Reset sound cut joins the picture and audio edit points again.
Both clips need audio and enough unused source frames for the extension. The feature applies to adjacent, unretimed Story clips. Expand nested sequences to change their individual sound cuts.
Group Story clips into a nested sequence
Select the first Story clip to group, expand Nest Story clips in the Inspector, and enter a name and a clip count. Choose Create nested sequence. The group keeps the original timing and moves with its anchored overlays. Select it and choose Expand nested sequence to edit the individual clips. Expand an existing group before combining it with other Story clips.
Change speed within a shot
Select a Story or Cutaway movie and expand Speed curve. Choose Stepped for abrupt speed changes, or Smooth ramp to accelerate or decelerate between points. Choose Add speed point to add a point, then set its frame and speed. Points must be in chronological order. Set each speed between 25% and 400%. A clip supports up to eight speed sections. The clip keeps its timeline duration. The source needs enough frames for the full curve. For stepped curves, leave Keep audio pitch enabled to retime the clip’s sound while retaining its pitch. Turn it off to mute the clip. Smooth ramps mute the clip’s source audio.
Use Match source frame to inspect the source at the playhead. Clear the curve before splitting or precision trimming the clip. Automatic captions and transcript-based edits skip retimed clips. Clearing a curve keeps the clip muted until you restore its gain or undo the original edit.
Review a picture transition
Select the incoming Story clip and expand Picture transition in the Inspector. The section shows available source handles. Open Dip to black and choose a preview duration, then apply that duration if it works for the cut. The dip uses frames already inside the two shots. The cut stays at its timecode and the audio continues beneath it. Cutaways can cover the Story picture. Use Remove dip to clear it.
Mark moments to revisit
Put the playhead on a moment you want to review and open Markers above the timeline. Enter a label and click Add at playhead. Use Jump or click the bookmark on the ruler to return to that frame. You can rename or remove notes from the list. Markers retain their sequence timecode when clips move, and are saved with the project.
Tighten an interview and add captions
- Select a Story clip with spoken audio and open Transcript above the timeline. Click Transcribe on this Mac. If asked for a language model, use Install language model, then retry. The model download is handled by macOS. Recognition runs on the Mac.
- Type into Search Story quotes to search across the edited Story. Jump to quote moves the playhead. Loop quote plays the phrase with half a second of context on either side where available. Clear the search to return to clip-specific tools. Turn on Meaning search and press Search for phrases that express a similar idea. Use Find related quotes beneath a phrase to use it as the starting point. This runs locally and requires a sentence model for the detected transcript language. Turn the toggle off to return to exact search.
- To remove a full phrase, choose Review cut, compare Before cut and After cut, then click Apply sentence cut. Jump from the review to any affected clip. Attached overlays can be trimmed or moved with the edit. Use ⌘Z to undo.
- For shorter pauses, expand Smart Cut and review a suggestion. Compare Before and After before choosing Apply cut. A gap in recognized speech can contain sound. For multiple suggestions on the selected clip, use Review protected batch to skip cuts that overlap Caption or Cutaway clips.
- Choose Caption → Generate captions from Story. Splice Desk uses available transcripts and transcribes missing sources locally. Select a cue to correct wording or line breaks and click Apply changes. Use Add manual caption for a cue you want to place yourself, or Title for on-screen titles.
Label and filter speakers
Choose Label speaker beneath a transcript phrase. Enter a name or select an existing label, then save. A label applies to that source phrase at every occurrence in the current edit. Use the All speakers menu to filter by speaker or turn on Hide questions. The question filter uses ending punctuation. Speaker names are assigned manually.
Map story coverage
Open Transcript → Story coverage and click Scan transcript coverage. The scan groups transcribed source phrases into themes. It shows how many complete phrases are used in Story, how many remain unused, and how many extra occurrences repeat a source phrase. Open an example at its source timecode. Unused examples are shown when available. The scan processes up to 2,000 phrases and reports the number analyzed.
Check a quote’s source context
Choose Check source context beneath a quote. The panel shows adjacent phrases from the source with their timecodes and flags possible missing context. A warning is a review cue. Use the surrounding material to check what the speaker meant.
Compare takes
Choose Compare takes beneath a transcript quote. Splice Desk finds related passages and lists each distinct source range once, even if it appears more than once in the Story. Loop either take or choose Play original, then alternate to hear both exact excerpts in order. The comparison is a preview. Use the source labels and durations to choose the take you want in your edit.
Build a rough cut from a brief
Open Transcript → Brief to rough cut. Enter a description and choose the maximum duration, then click Build rough cut. Splice Desk ranks existing complete phrases using the local sentence model and arranges excerpts in original Story order. Review the timeline and source timecodes, loop individual originals, or choose Preview draft. Click Save draft to save an editable project copy. The draft can be shorter than the limit if fewer relevant excerpts fit.
Switch camera angles
- Select the Story clip and click the ruler where the new angle should begin.
- Choose the alternate camera file in the Media bin. Mark its in and out points in the Source monitor.
- If both cameras recorded common sound, mark a rough in-point and choose Place in sequence → Align camera by audio. Put the Story playhead at least one second before the selected clip ends. Review the suggested source mark. If the match is ambiguous, move the rough mark closer or align manually.
- Choose Switch camera at playhead. The alternate picture plays for the marked duration or to the end of the selected Story clip, whichever comes first. Story dialogue stays audible underneath.
Make a vertical version
- In the format menu beside Export, choose Portrait 9:16. This changes the current sequence's format. Save a separate project copy if you want separate landscape and portrait files.
- Select a Story or Cutaway shot. Adjust Horizontal crop or click Suggest face crop. Use Preview crop, then Apply changes.
- For several shots, choose Review portrait framing from the format menu. Inspect shot opens a single shot in the Inspector. Apply suggestions commits the clear proposals together while preserving existing crops and locked lanes.
- Play through key shots to check framing, especially when people move or enter the frame between sampled points.
Export a quote, reel or full edit
| Output | Steps |
|---|---|
| Standalone quote MP4 | On a transcript row, open Export quote and select Sentence only or With surrounding context. The MP4 uses the current picture, audio and burned-in captions. |
| Editable reel draft | Open Transcript → Highlights. Check the excerpts to include and choose Save reel draft. Open the saved JSON with Open Project when ready to edit it. Excerpts use sentence boundaries and appear in original timeline order. |
| Landscape or portrait master | Open Export and choose the MP4 option for the current format. Pick an output filename. Export uses original media. |
| Separate subtitles | Open Export → Subtitle track · SRT when the sequence has captions. Use the SRT with the full sequence. |
Organize media and export a review range
- Use Search media to filter by filename. Open Bin tools to sort alphabetically, display offline or unused items, reveal the selected original in Finder, or generate missing proxies for linked movies. Both filters can be active together.
- Use Timeline tools to jump between Story cuts or timeline markers. Set an In and Out point on the ruler, or select a clip and use Set range to selected clip. The Out point includes the displayed frame. The toolbar shows the marked duration.
- Choose Loop marked range to review the selection. Under Export, use Marked range · MP4 and Marked range · SRT as a matching pair. Captions crossing either end are clipped and begin at the proper time within the exported movie. Marked ranges are working selections for the current session.
- In Caption → Batch caption edits, enter search and replacement text to correct repeated wording. Search ignores letter case. Enter a signed frame offset to shift the caption track. A shift that would push a caption before its anchor or the sequence start is rejected as a whole.
- Use Subtitle track · WebVTT for web captions and Transcript · TXT for timecoded Story phrases. Clean picture · MP4 exports without burned-in titles or captions. Current frame · PNG captures the timeline playhead frame, and Stereo mix · WAV writes the full sequence mix as 48 kHz stereo 24-bit PCM.
Compare saved versions
Open Local workspace → Edit versions and give the current edit a name. After editing, open the same menu and select a saved version. Preview either version or tick existing clips whose saved settings you want to restore. Use Use saved version to restore the entire saved timeline as an undoable edit. Version snapshots live locally.
Save, recover and troubleshoot
| If you need to… | Do this |
|---|---|
| Start, open, save or import | Use ⌘N, ⌘O, ⌘S or ⌘I. Save a project copy before replacing the current session. |
| Undo or redo | Use ⌘Z or ⇧⌘Z. The last committed session also recovers when you reopen the app. |
| Open a project on another Mac | Copy the JSON and original media. Use Relink original and select an identical copy for each missing asset. |
| Resolve an unavailable edit | Check the lane menus for locks. For Smart Cut, Why is this cut unavailable? shows the reason. |
| Resolve a failed face or audio match | Check that the originals are linked. Use manual crop or source marks when automatic analysis has insufficient evidence. |
| Remove stored proxies or file grants | Open Local workspace and choose Clear preview proxies or Forget media permissions. After forgetting grants, use Relink original to restore access. |
Project copies can include transcript and caption text as well as asset names. Preview proxies contain footage. Keep both in mind when sharing files or choosing what to retain locally.
For a complete list of shipped behavior and current limits, see the feature inventory.
Splice Desk